---

name: deploy-zephyr description: Integrate Edge Impulse Zephyr Module deployments into Zephyr or Nordic nRF Connect SDK applications, including west manifests, CMake, Kconfig, devicetree sensors, static-buffer inference, clean builds, flashing, and porting across boards. Use for nRF5340 and other Zephyr-supported targets. metadata: version: "0.1.0"

Edge Impulse Zephyr integration

Prefer the Edge Impulse Zephyr Module and a Zephyr Module deployment over manually copying a generic C++ export.

Inspect first

1. Identify the Zephyr or NCS version, exact board qualifier, application/manifest repository, sensor, model type, and current module layout.
2. Inspect west.yml, CMakeLists.txt, prj.conf, overlays, and existing application sources.
3. Confirm compatible revisions from current Edge Impulse and Zephyr/NCS documentation. Do not assume the latest Zephyr module works with every NCS release.

Add the module and model

For a new reference workspace:

west init -m https://github.com/edgeimpulse/example-standalone-inferencing-zephyr-module
west update

For an existing manifest, add the edge-impulse-sdk-zephyr project at a compatible pinned revision and register its west commands when using west ei-build or west ei-deploy. Then run west update.

Export the model as Zephyr Module, extract it under model/, and verify it contains CMakeLists.txt, edge-impulse-sdk/, model-parameters/, and tflite-model/. Make the model discoverable:

list(APPEND ZEPHYR_EXTRA_MODULES ${CMAKE_CURRENT_SOURCE_DIR}/model)

Place this before find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE}) when required by the project's CMake structure.

Configure

• Enable C++ and the sensor, bus, logging, and memory options required by the application.
• Configure hardware in devicetree/overlays; do not hardcode controller instances that the board DTS already exposes.
• Use DEVICE_DT_GET and Zephyr sensor APIs, and verify device_is_ready().
• Increase CONFIG_MAIN_STACK_SIZE, heap, or thread stack only from measured need.
• Preserve NCS sysbuild, child-image, and board qualifier conventions in existing Nordic projects.

Inference pattern

1. Initialize the sensor and model.
2. Sample at EI_CLASSIFIER_INTERVAL_MS or the generated frequency.
3. Store values in training channel order and units.
4. Fill exactly EI_CLASSIFIER_DSP_INPUT_FRAME_SIZE values.
5. Construct signal_t with a bounds-safe callback.
6. Call run_classifier() from thread context.
7. Handle classification, detection, and anomaly outputs according to generated macros.

Use a Zephyr timer, sensor trigger, or dedicated sampling thread plus a ring buffer for continuous inference. Do not run the classifier or blocking logging in an ISR.

Build and deploy

west build --pristine -b <board-qualifier>
west flash

Always use a pristine build after replacing the model or changing module revisions. Use the board's supported runner when west flash needs one.

nRF5340 specifics

• Select the correct application-core board qualifier for the installed NCS version.
• Keep inference on the application core unless the project architecture explicitly assigns it elsewhere.
• Check TrustZone/nonsecure target conventions, network-core images, partition manager output, and flash/RAM placement before changing linker behavior.
• Use nRF Connect SDK's pinned Zephyr and module compatibility rather than mixing arbitrary upstream revisions.

Verify

1. Test one raw feature window copied from Studio and compare results.
2. Test live input for sample rate, units, axis/channel order, and ring-buffer overruns.
3. Inspect build RAM/flash reports and thread stack usage.
4. Monitor serial logs after flashing and confirm repeated inference without faults.

Common failures

• west: unknown command ei-build: run inside the manifest workspace, enable extensions, and verify west-commands in the manifest.
• Model headers missing: confirm the archive was extracted into model/ and registered as a module.
• Sensor not ready: inspect devicetree status, aliases, bus pins, and Kconfig driver symbols.
• Inaccurate predictions: compare a known Studio window before changing the model.